Pellets Presses
We are distributor for a range of very affordable and sturdy pellets presses and mills. However, the conditon of the feed stock is most crucial. Material we recommend could be saw dust and shavings from a variety of trees. Though, you should be aware of that some energy trees does produce high ash content and, so called energy grass has a low ash melting point, which makes it unsuitable for most domestic pellets burners.
Small Size Mobile Pellets Factory!
For the small scale saw mill, furniture factory or whoever would like to test the production of energy and other pellets but does not have the know how nor the timer to set a line of their own, we are happy to be able to offer a Micro Size Pellets Pressing Factory. This is a Turn-Key factory with everything from hammer mill to sieve, built on a steel skid that will fit into a 20' container, which essentially makes it a Mobile Pellets Factory - you only need a fork lift capable of lifting 3 MT.
The 250kg/h line consists of:
• Hammer mill with 15 kW motor and a 5 mm sieve
• Cyclone to suck out the sawdust from the hammer mill
• Mixer and screw conveyor to feed the pellets press
• Pellets press 22 kW with flat die, 6-8 mm and cooler/sieve
• Control panel
However, you need to have a suitable material with a water content of 13-18% and pieces (wood chips 2-3 cm) not larger than the hammer mill can reduce the material to less than 5 mm. Look further down the page for a small dryer.
Modell |
Micro Factory 250 |
Capacity |
200-300 kg/h |
Power |
22 kW (total 57 kW, rated) |
NW/GW |
3 000/3 200 kg |
Full size |
4 000 x 2 100 x 3 000mm |
Down load clip to see who easy the flat pellets press is to stop and start
News! We also have a 500kg/h line
For full specifications and price please fill in the form at the bottom of this page and let us know the characteristics of the feed stock you are planning to use so that we can help you produce good quality pellets! Or, give us a call: +44 (0) 7549 95 93 94
Or, if you prefer a stand alone...
The GreenPell 400:
For more info please fill in the form at the bottom of the page, or give us a call: +44 (0) 7549 95 93 94
| Model | GreenPell 400 |
| Capacity | 200-250 kg/h |
| Power | 22 kW |
| Weight | 500 kg |
Size |
1220 x 600 x 1 000 mm |
| Pellets size |
6 & 8 mm |
This type of pellets press comes from 55-100kg/h to over 1 tonne/h. This model is normally in stock otherwise is the shipment from order approx. 8-10 weeks.
Rotary dryers - We have them from 2-400 Kg/h
EkoTork 300
| Model | EkoTork 300 | EkoTork 700 | EkoTork 1200 |
| Capacity | 150-300 kg/h | 400-800 kg/h | 700-1400 kg/h |
| Material size |
3-5 mm | 3-5 mm | 3-5 mm |
| Temp | 180°C~250°C | 180°C~250°C | 180°C~250°C |
| Power | 4 kW | 5,5 kW | 7,5 kW |
Rotary dryers - We have them from 2-400 Kg/h
For more info please fill in the form at the bottom of the page, or give us a call: +44 (0) 7549 95 93 94
EkoTork 300
| Model | EkoTork 300 | EkoTork 700 | EkoTork 1200 |
| Capacity | 150-300 kg/h | 400-800 kg/h | 700-1400 kg/h |
| Material size |
3-5 mm | 3-5 mm | 3-5 mm |
| Temp | 180°C~250°C | 180°C~250°C | 180°C~250°C |
| Power | 4 kW | 5,5 kW | 7,5 kW |
We also have larger presses and complete Turn-key production lines. Ask for a quote!
EkoPell 1000 – 1000 MT/h and upwards
GreenForze can supply you with a range of small to medium scale equipment for the production of biofuels as well as green electricity. If there is something you can not find or if you need further information, please fill in the form in the below and write a few lines about what you need from us:
© - 2007-8 GreenForze, WEB-master